How many devices can you connect in a single room? If you operate a hotel, apartment building, or other multi dwelling unit (MDU) structure, your answer can have a big impact on your bottom line.
The RUCKUS® H350 wall-mounted access point, IoT gateway and Ethernet switch makes it easy to support in-room connectivity requirements. It starts with RUCKUS patented Wi-Fi optimization intelligence to deliver the industry's highest-performing wireless connectivity. Combine that with two-ports of Gigabit Ethernet to connect in-room wired devices, without extra cabling and add supports for Zigbee® or Bluetooth® Low Energy (BLE). Put it all in a sleek, low profile design that can be discretely installed over a standard electrical outlet.
The RUCKUS H350 wall-mounted access point, IoT gateway and Ethernet switch makes it easy to support in-room connectivity requirements. It starts with RUCKUS patented Wi-Fi optimization intelligence to deliver the industry's highest-performing wireless connectivity. Combine that with two-ports of Gigabit Ethernet to connect in-room wired devices, without extra cabling and add supports for Zigbee® or Bluetooth® Low Energy (BLE). Put it all in a sleek, low profile design that can be discretely installed over a standard electrical outlet.
The RUCKUS® H350 delivers consistent, reliable Wi-Fi 6 (802.11ax) wireless networking without breaking the bank. The AP features the patented RUCKUS technologies for performance optimization and interference mitigation found in our premier access points, delivering superior user experiences. But it provides them in an entry level product built for smaller venues with limited device diversity.
The H350 is a great choice for low-density enterprise, hospitality, MDU, small and medium-size businesses, retail locations, restaurants, and multi-tenant small offices and branch offices.
The H350 Wi-Fi 6 AP incorporates patented technologies found only in the RUCKUS Wi-Fi portfolio.
- Extended coverage with BeamFlex+ utilizing multi-directional antenna patterns.
- Improve throughput with ChannelFly®, which dynamically finds less congested Wi-Fi channels to use.
The H350 provides an ideal combination of features and performance for smaller environments.
Whether you’re deploying ten or ten thousand APs, the H350 is also easy to manage through RUCKUS’ appliance, virtual, controller-less and cloud management options.
Benefits
GREAT ALL-IN-ONE: WI-FI 6, IoT, WIRED PORTS
Deliver great in-room Wi-Fi and enable consolidated IP services with Wi-Fi 6 speed, BLE or Zigbee, and a built-in 2-port Gigabit Ethernet switch.
STUNNING WI-FI PERFORMANCE
Patented RUCKUS technologies for performance optimization and interference mitigation delivers extended coverage and superior user experience.
IoT ON BOARD
Eliminate siloed networks and unify Wi-Fi and IoT technologies into one single network
MESH NETWORKING
Dynamically create self-forming, self-healing network mesh with RUCKUS patented SmartMesh technology reducing expensive cabling, and complex configurations by checking a box.
AFFORDABLE ENTERPRISE PERFORMANCE
The H350 delivers unprecedented price/performance
KEEP EXISTING SWITCHES AND CABLES
Designed to operate on existing PoE switches and CAT 5e cabling to minimize costly power infrastructure upgrades.
MULTIPLE UNIFIED MANAGEMENT OPTIONS
Manage the H350 from the cloud, with on-premises physical/virtual appliances, or without a controller.
Access Point Antenna Pattern
RUCKUS' BeamFlex+ adaptive antennas allow the H350 AP to dynamically choose among a host of antenna patterns in real-time to establish the best possible connection with every device. This leads to:
- Better Wi-Fi coverage
- Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the RUCKUS BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
Antenna Patterns
Antenna Patterns
Antenna Patterns
Antenna Patterns
Note: The outer trace represents the composite RF footprint of all possible BeamFlex+ antenna patterns, while the inner trace represents one BeamFlex+ antenna pattern within the composite outer trace.
| Wi-Fi Standards |
|
| Supported Rates |
|
| Supported Channels |
|
| MIMO |
|
| Spatial Streams |
|
| Radio Chains and Streams |
|
| Channelization |
|
| Security |
|
| Other Wi-Fi Features |
|
| Antenna Type |
|
| Antenna Gain (max) |
|
| Peak Transmit Power (aggregate across MIMO chains) |
|
| Minimum Receive Sensitivity1 |
|
| Frequency Bands |
|
| HT20 | HT40 | VHT20 | VHT40 | ||||
|---|---|---|---|---|---|---|---|
| MCS0 | MCS7 | MCS0 | MCS7 | MCS0 | MCS7 | MCS0 | MCS7 |
| -94 | -75 | -91 | -72 | -94 | -75 | -91 | -72 |
| HE20 | HE40 | ||||||
| MCS0 | MCS7 | MCS9 | MCS11 | MCS0 | MCS7 | MCS9 | MCS11 |
| -94 | -75 | -71 | -65 | -91 | -72 | -68 | -62 |
| VHT20 | VHT40 | VHT80 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| MCS0 | MCS7 | MCS8 | MCS9 | MCS0 | MCS7 | MCS8 | MCS9 | MCS0 | MCS7 | MCS8 | MCS9 |
| -97 | -76 | -72 | -- | -92 | -73 | -- | -67 | -89 | -70 | -- | -64 |
| HE20 | HE40 | HE80 | |||||||||
| MCS0 | MCS7 | MCS9 | MCS11 | MCS0 | MCS7 | MCS9 | MCS11 | MCS0 | MCS7 | MCS9 | MCS11 |
| -95 | -76 | -70 | -65 | -92 | -73 | -67 | -62 | -89 | -70 | -64 | -59 |
| Rate | Pout (dBm) |
|---|---|
| MCS0 HT20 | 16 |
| MCS7 HT20 | 15 |
| MCS8 VHT20 | 14 |
| MCS9 VHT40 | 13 |
| MCS11 HE40 | 11 |
| Rate | Pout (dBm) |
|---|---|
| MCS0 HT20 | 19 |
| MCS7 VHT40, VHT80 | 15.5 |
| MCS9 VHT40, VHT80 | 14.5 |
| MCS11 HE20, HE40, HE80 | 12 |
| Peak PHY Rates |
|
| Client Capacity |
|
| SSID |
|
| Antenna Optimization |
|
| Wi-Fi Channel Management |
|
| Client Density Management |
|
| SmartCast Quality of Service |
|
| Mobility |
|
| Diagnostic Tools |
|
| Controller Platform Support |
|
| Mesh |
|
| IP |
|
| VLAN |
|
| 802.1x |
|
| Tunnel |
|
| Policy Management Tools |
|
| IoT |
|
| Ethernet |
|
| Physical Size |
|
| Weight |
|
| Mounting |
|
| Operating Temperature |
|
| Operating Humidity |
|
Power Configuration Options
| Power Mode | 802.3af | |
| Wi-Fi (2.4GHz) | Tx Power (per Chain) | 16dBm (2x2) |
| Wi-Fi (5GHz) | Tx Power (per Chain) | 19dBm (2x2) |
| IoT Radios | BLE or Zigbee | Enabled |
| Ethernet LAN Ports (2x) | Enabled | |
| Power Consumption | 12.54W | |
| Wi-Fi Alliance3 |
|
| Standards Compliance4 |
|
| Location Based Services |
|
| Network Analytics |
|
| Security and Policy |
|
| 901-H350-XX00 |
|
See RUCKUS price list for country-specific ordering information.
Warranty: Sold with a limited lifetime warranty.
For details see: http://support.ruckuswireless.com/warranty.
| 902-0162-XXYY |
|
| 902-0170-XXYY |
|
| 902-0136-0000 |
|
PLEASE NOTE: When ordering Indoor APs, you must specify the destination region by indicating -US, -WW, or -Z2 instead of XX. When ordering PoE injectors or power supplies, you must specify the destination region by indicating -US, -EU, -AU, -BR, -CN, -IN, -JP, -KR, -SA, -UK, or -UN instead of -XX.
For access points, -Z2 applies to the following countries: Algeria, Egypt, Israel, Morocco, Tunisia, and Vietnam.
1Rx sensitivity varies by band, channel width and MCS rate.
2Refer to Unleashed datasheets for SKU ordering information.
3For complete list of WFA certifications, please see Wi-Fi Alliance website.
4For current certification status, please see price list.