In hotels and housing structures, residents and guests have sky-high expectations for their in-room connectivity options. The technology experience—the quality of available high-speed wired and wireless Internet, voice, and TV services—is becoming a central factor in which hotels people choose for both business and leisure. When weighing options for long-term housing, poor-quality wired and wireless services can cause prospective residents to disqualify a property altogether.
The RUCKUS® C110 delivers a modern, in-room wall-mount solution that is fast and easy to install, using existing in-building or off-premises Cable Modem Termination Systems (CMTS). The C110 combines the industry's highest-performing 802.11ac Wave 2 wireless access point with a DOCSIS 3.0 cable modem and Ethernet switch.
The C110 is the perfect choice for hotels, student residence halls, and multi-dwelling unit (MDU) properties that depend on coaxial cable to deliver high-speed Internet. Equipped with two Ethernet ports, it can connect IPTV set-top, VoIP telephones, and other wired devices. At the same time, the C110 delivers great 802.11ac wireless performance with advanced features such as guest access and Hotspot 2.0.
The C110 802.11ac Wave 2 Wi-Fi AP and switch incorporates patented technologies found only in the RUCKUS Wi-Fi portfolio.
- Extended coverage with patented BeamFlex®+ utilizing multi-directional antenna patterns.
- Improve throughput with ChannelFly®, which dynamically finds less congested Wi-Fi channels to use.
The C110 also provides next-generation 802.11ac features like MultiUser MIMO (MU-MIMO) connectivity. It can simultaneously transmit to multiple client devices, drastically improving spectral efficiency, overall throughput for all users—even those with non-Wave 2 clients. Additionally, it features a USB port for hosting Internet of Things (IoT) devices such as Bluetooth Low Energy (BLE), and support for smart mesh networking to minimize the need for extra cabling.
Whether you're deploying ten or ten thousand APs, the C110 is easy to manage through RUCKUS's network controller and appliance options.
NOTE: The C110 is available only through approved DOCSIS RUCKUS Partners, as its installation requires specialized knowledge of cable modems and CMTS equipment. For more details, please contact your local RUCKUS sales team.
Benefits
NO CAT 5 NEEDED
Deliver great in-room Wi-Fi and concurrent wired IP connectivity using an integral DOCSIS 3.0 cable modem for backhaul over coaxial cable.
GREAT ALL-IN-ONE
Combines the best of Wi-Fi with 802.11ac Wave 2 and a switch with two 100Mbps ports into one wall-mounted unit.
STUNNING WI-FI PERFORMANCE
Extends coverage with patented BeamFlex®+ adaptive antenna technology while mitigating interference by utilizing multi-directional antenna patterns.
AUTOMATE OPTIMAL THROUGHPUT
ChannelFly® dynamic channel technology uses machine learning to automatically find the least congested channels. You always get the highest throughput the band can support.
SERVE MORE DEVICES
Connect more devices simultaneously with two MU-MIMO spatial streams and concurrent dual-band 2.4/5GHz radios while enhancing non-Wave 2 device performance.
SUPPORT MORE SERVICES
Multiple SSIDs and switch ports help support services such as VoIP, IPTV, and high-speed Internet access and in-room device connectivity.
MORE THAN WI-FI
Support services beyond Wi-Fi with RUCKUS IoT Suite, Cloudpath® security and onboarding software, SPoT Wi-Fi locationing engine, and SCI network analytics.
CONVERGED WIRED AND WIRELESS SERVICES
Access Point Antenna Pattern
RUCKUS' BeamFlex+ adaptive antennas allow the C110 AP to dynamically choose among a host of antenna patterns in real-time to establish the best possible connection with every device. This leads to:
- Better Wi-Fi coverage
- Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the RUCKUS BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
Note: The outer trace represents the composite RF footprint of all possible BeamFlex+ antenna patterns, while the inner trace represents one BeamFlex+ antenna pattern within the composite outer trace.
Wi-Fi Standards |
|
Supported Rates |
|
Supported Channels |
|
MIMO |
|
Spatial Streams |
|
Channelization |
|
Security |
|
Other Wi-Fi Features |
|
Antenna Type |
|
Antenna Gain (max) |
|
Peak Transmit Power (aggregate across MIMO chains) |
|
Minimum Receive Sensitivity1 |
|
Frequency Bands |
|
HT20 | HT40 | ||
---|---|---|---|
MCS0 | MCS7 | MCS0 | MCS7 |
-90 | -72 | -87 | -69 |
VHT20 | VHT40 | VHT80 | |||
---|---|---|---|---|---|
MCS0 | MCS7 | MCS0 | MCS7 | MCS0 | MCS7 |
-92 | -72 | -89 | -69 | -86 | -64 |
Rate | Pout (dBm) |
---|---|
MCS0 HT20 | 16 |
MCS7 HT20 | 15 |
Rate | Pout (dBm) |
---|---|
MCS0 VHT20 | 19 |
MCS7 VHT20 | 14 |
MCS0 VHT40, VHT80 | 19 |
MCS7 VHT40, VHT80 | 14 |
MCS9 VHT40, VHT80 | 12 |
Peak PHY Rates |
|
Client Capacity |
|
SSID |
|
Antenna Optimization |
|
Wi-Fi Channel Management |
|
Client Density Management |
|
SmartCast Quality of Service |
|
Mobility |
|
Diagnostic Tools |
|
Controller Platform Support |
|
Mesh |
|
IP |
|
VLAN |
|
802.1x |
|
Tunnel |
|
Policy Management Tools |
|
DOCSIS Version |
|
Channel Bonding |
|
Support and Management |
|
Ethernet |
|
USB |
|
Cable Modem |
|
Physical Size |
|
Weight |
|
Mounting |
|
Physical Security |
|
Operating Temperature |
|
Operating Humidity |
|
Power Supply | Maximum Power Consumption |
---|---|
DC input: 12VDC 2.0A |
|
Wi-Fi Alliance3 |
|
Standards Compliance4 |
|
Location Based Services |
|
Network Analytics |
|
Security and Policy |
|
901-C110-US00 |
|
901-C110-EU01 |
|
901-C110-UN00 |
|
901-C110-UK01 |
|
901-C110-AR00 |
|
901-C110-AU00 |
|
Warranty: Sold with a limited lifetime warranty.
For details see: http://support.ruckuswireless.com/warranty.
902-0124-0000 |
|
1Rx sensitivity varies by band, channel width and MCS rate.
1Max power varies by country setting, band, and MCS rate.
1For complete list of WFA certifications, please see Wi-Fi Alliance website.
1For current certification status, please see price list.